Why Does My iPad Say Not Charging 7 Ways to Solve 2023
Many folks who are searching for “iPad not charging” are looking for a reasonably cryptic message that has been around for a long time. When you put in your iPad, the battery level indicator states “not charging.”
Seeing this notice may lead you to believe that something is wrong with your valuable tablet, but this is nearly certainly not the case. This notice signifies that a cable has been connected to the iPad, but it is not receiving enough power to charge the battery.
It happens when you connect it to a computer’s USB port, which only provides the regular number of USB amps. It’s insufficient to power a power-hungry device like an iPad! Some dedicated USB chargers may be in the same situation. Your iPad may still be charging, albeit slowly, even with this notification shown. Alternatively, it may cease draining the battery while plugged in but does not change over time.
There’s a problem with one of the four pieces that work together to charge your iPad when it won’t charge. These are the four elements:
- The software on your iPad (iPad-OS)
- Your iPad’s power supply.
- It’s your lightning cord.
- The charging port on your iPad
This post will show you how to identify which component is causing your iPad’s charging issue and how to solve it permanently!
Method 1: Examine the Charger
iPad-OS can detect power variations from the charger you’re using. Those power fluctuations can be viewed as a danger to your iPad’s safety. Rather than trying to push through, your iPad may cease charging.
Charge your iPad using several chargers, including every USB connection on your laptop and the wall charger that came with it when you bought it. If you’re like me, your surge protector may have a USB port built-in; try that as well.
If you notice that your iPad charges with specific chargers but not others, you’ve determined that the issue was with your iPad charger rather than the iPad itself. If your iPad doesn’t charge no matter which charger you use, proceed to the next step, where we’ll help you troubleshoot Lightning cord issues.
Method 2: Examine the Cable
Ensure you’re using an MFi certified cable (designed for iOS) if you have an iPad with a Lightning connector. iOS devices that use the Apple Lightning connector will not work with cords that do not contain the necessary MFI authentication hardware.
Connect your cable to an Apple-certified powered USB hub, docking station, or other accessory.
If you’re trying to charge your iPad or later wirelessly, first make sure you can charge it with the USB cord that comes with it. If that doesn’t work, seek assistance with wireless charging. If you’re buying a third-party item, be sure it’s Apple certified.
Except for USB-C to Lightning adapters, no USB cables feature any MFI-type block at the time of writing. While plans to bring something similar to USB-C cables and chargers are underway, it has yet to materialize. If you have a USB-C iPad, though, make sure the cable isn’t faulty by testing it with another device.
Method 3: Examine Your Port
Now that you’ve tried a variety of cords and chargers, it’s time to take a look inside your iPad. Examine your iPad’s charging port with a flashlight (like the one integrated into your iPad). We’re looking for any dirt, lint, muck, or other debris that might be blocking your charging cable from connecting to your iPad’s charging port cleanly.
Lightning ports are found on older iPads and consist of eight small pins that connect to a Lightning cable during charging. The USB-C port on newer iPads contains twenty-four pins. If any of the pins are covered by debris, they may be unable to connect to your charging cord.
It’s better to be safe than sorry in most circumstances. Even though there isn’t a lot of junk in the charging port, it’s a good idea to clean it out. Occasionally, small amounts of dust that you can’t see stop your iPad from charging.
Method 4: Examine Socket
Occasionally, the issue is quite evident. You’d never think of it if it wasn’t so obvious! If your iPad’s charger isn’t directly hooked into a power outlet, check it first to see if any other extensions or socket systems are malfunctioning.
Make sure the connection is solid and secure and that other devices plugged into that outlet work correctly. Examine the charger for any damage to the prongs that could interfere with the connection. When working with domestic electrical systems, always be cautious!
Method 5: Restart your device.
Although rebooting an iPad is virtually never necessary, if your tablet refuses to acknowledge that you’ve plugged it in, the least you can do is switch it off and on again. Even when plugged into a working charger, an iPad’s software would frequently go fully down, leaving the screen black and unresponsive. A hard reboot usually fixes the problem.
Whether you have an iPad with or without a physical home button, there are different ways to do this.
If your iPad doesn’t have a home button, follow these steps to restart it:
- Hold the top button of the device in place.
- While you do that, hold one of the volume buttons until the power off slider appears.
- To turn off your iPad, slide the slider.
- Allow a few moments to pass, and perhaps take a minute to appreciate life.
- Hold the top button down until you see the Apple logo.
- Try charging it again after your iPad has been rebooted.
- Here’s how to reboot your iPad if it has a home button:
- Hold down the top button until the power off slider appears.
- To turn off the iPad, slide it off.
- Wait for a few moments.
- Now press and hold the top button until the Apple logo appears.
Plug the charger in after the device has booted up to check whether it has made a difference.
If your iPad still won’t charge after a reboot, it’s most likely not a software issue.
Method 6: Apple should look into it.
If you’ve followed the steps on this page and your iPad still won’t charge or turn on, you’ll need to take it to an Apple store. If your iPad is still under warranty, you should be able to replace or repair it. If not, you may be able to replace the battery or charging circuitry in some circumstances, but if this is not possible or is too expensive, you may have to buy a new iPad.
That said, unless your iPad is ancient or has failed due to a manufacturing flaw, it’s unlikely to be a long-term problem!
Method 7: Perform a DFU Restore.
You’ve ruled out the potential of a minor software crash, a problem with your charger or charging cord, and a dirty or blocked charging port if you’ve made it this far. We’ve got one more trick up our sleeves: a DFU restore.
A DFU restoration removes your iPad’s code and resets it to factory defaults.
Finally, a DFU restore can resolve a severe software issue, which could be the cause of your iPad’s inability to charge.
Make a backup of your iPad because you’ll lose your images, contacts, videos, and other things if you don’t. When you’re ready, check out our DFU restore walk through video on YouTube!
FAQ: Why Does My iPad Say Not Charging
If your iPhone not charging past 80
While charging, your iPhone may become somewhat warmer. If your battery gets too warm, the software may prevent charging above 80% to extend the battery’s lifespan. When the temperature drops, your iPhone will charge again. Try putting your iPhone and charger somewhere more fabulous.
Optimized battery charging is used in iOS 13 and later to decrease the rate of battery aging by minimizing the amount of time your iPhone is fully charged. Your iPhone employs on-device machine learning to learn about your regular charging routine so that it can finish charging past 80 percent when you need it.
When your iPhone forecasts that it will be connected to a charger for an extended period of time, Optimized Battery Charging kicks in.
This accessory may not be supported fix
These warnings may arise for a variety of reasons:
The charging port on your iOS iPhone may be dirty or broken.
If your charging accessory isn’t Apple-certified, it’s either malfunctioning or broken.
Take the following steps:
• Remove any dirt from your device’s charging port on the bottom.
• Restart your iPad or iPhone.
• Change the USB cable or charger.
• Make sure you’re running the most recent version of iOS.
• To set up a service, contact Apple Support.