How to Fix When Washing Machine Not Draining?
Washing machines are one of the essential electronics at home, and when that has problems, it creates quite a lot of tension. The most common issue that occurs with washing machines is clogged washing machine drain pipes. It usually happens due to soap residue, grease, dryer lint, or oils that come from the clothes.
To resolve the issue, you’ll need to clean the washing machine drain pipe. It is mainly done with the help of a drain cleaner or snake tool. You’ll need to put in a little time and effort, and your drainpipe will start flowing freely.
The main reasons for the washing machine not draining are small objects will find their way into the drain pump in the washing machine and end up preventing the drain pump from running, including keys, nails, children’s socks, kids’ toys, and other small items, screws, and coins.
Let’s see how you can use drain cleaners and the snake tool to clean your washing machine drain pipe to fix When Washing machines Not Draining.
1. Locate the drain
To clean the washing machine drain pipe, the very first thing you need to do is find the drain. In most washing machines, it is the pipe behind the machine in which the hose pours water.
This hose might be attached directly to the pipe or might just be pushed into the pipe.
While you’re finding the drain, you should also have to differentiate it from the hot and cold-water lines.
These hot and cold-water lines are mostly smaller than the drain pipe and are usually marked with red and blue colors. This shows which is cold or hot and so it should be easier to find out.
2. Flow hot water down the drain
First of all, check if your drainpipe isn’t releasing any water or just draining slowly. If it’s draining slowly, you can try pouring hot water down the drain, clear out all the soap residue or scum that is clogging most part of the drain.
While doing this, you must consider how you run your washer. If you run your washer at hot water most of the time, then doing this might not work to unclog, and you’ve done it quite a few times yourself.
However, if you’re used to running it on cold water, then the magic might happen.
In case you live in a very cold area, you might be blocked with frozen ice.
Pouring down hot water will melt the ice and unclog your drain just the way you’d like.
3. Get a drain cleaner (Washing machine drainage options)
If your washing machine drain remains clogged, it’s time to get your hands in a drain cleaner. These drain cleaners usually are good with unclogging pipes but while you purchase them, make sure to get one that is safe to use with your particular type of washing machine pipe.
Some of these products have sulfuric acid that can damage the PVC pipes.
Get one that works for your machine as well as the environment to clean washing machine drain pipe.
4. Detach the pipe
5. Follow the instructions
You’ll be instructed to pour down the drain cleaner with some boiling water down the drain. Then you’ll be asked to wait for a specific amount of time for the cleaner to work. However, be careful that the cleaner doesn’t stay there for a more extended period, or else it can severely damage your pipe.
1. Detach the drain
When trying to clean washing machine drain pipe, you need to make sure that chemicals do not disrupt it. If it is not, then you’ll need to use a snake to dislodge your drain pipe. To continue with this, you’ll have to detach the drain pipe from the washing machine so that you can put the snake down the drain.
This draining hose is attached to your machine at the back, with a clamp that connects the two. For that, you can use a screwdriver to detach them.
After detaching it, some hot water might come out of the machine, so be prepared with a bucket and towels. If your machine is wholly clogged washing machine drain, there might be a lot of standing water in there.
2. Put the plumbing snake down the drain
After you’ve freed the drain pipe from the machine, you can insert the plumbing snake down the drainpipe. Snake is basically a tool with a long sturdy wire that goes all the way into the pipe.
It has a handle at the end for you to hold so that you can rotate it. It would be best if you pushed the snake into the pipe, and as soon as you feel the clog, rotate the snake so that it grabs all the debris.
When getting a plumbing snake, get one that is 50-75 feet long as it tends to work very well with clogs.
3. Snake the drain properly
You may have to rotate the snake tool a couple of times to unclog the entire pipe. Turning it several times will get out all the residue and clean the washing machine drain pipe. After getting it out, insert it one more time to clean out all the remaining debris. Push it down even further to ensure there are no more cleaning areas left. The key to using a snake tool is to pull it a little in and out when turning the handle so that it can pull out the debris from the pipe. Once you think it’s unclogged, remove the tool from the pipe. Flow some hot water into the drain to ensure that it’s all clean before reattaching it.4. Reattach the hose
Now, reattach the drain to the machine. Make sure to be very clean with it so that there are no leaks on the washing machine.
Fill the washing machine and drain it without any clothes to see if there are no draining issues.
Follow the steps mentioned above with utmost diligence to ensure you’re doing it correctly without damaging the machine and yourself and able to fix it when the washing machine is not draining.
1. Standpipe
A standpipe is a pipe that attaches your washing machine’s drain pipe to your washer’s waste stack.
2. Underground Pipe Connection.
If you would like absolutely the best draining option for your washer, an underground pipe is the thanks to going
3. Washer Drain Hose
Your washer’s drain hose is liable for removing wastewater from the washing machines. Due to the clog in drain hose the washing machine not draining properly.
This type of wastewater is carried to a standpipe or basin, counting the system.
In some houses, the washing room features a little nook that’s built into a wall. It serves to stay the drainpipe firmly in situ.
You’ll be got to settle that your drain pipe stays fixed firmly so that it doesn’t come moveable.
4. Laundry Tub
A laundry drum, you’ll primary be got to measure the topmost of your drum in view of washing machine not draining
Think of that; it should be no relatively 8 feet from the ground so that wastewater doesn’t return to your washer.
On one end of the drainpipe, there will be a curved end. It must rest over the edge of your laundry tub.
Furthermore, the bathtub and hose should be not quite 45 inches from your washer.
When we using a plastic cable tie, secure the drain hose to a leg of the washing tub. It’s also simple knowledge to ensure that the drainpipe isn’t near the bathtub’s bottom, as it will restrict water flow.
When your washer drains overflows, it’s usually a clog in your sewer pipe that’s responsible.
However, more serious issues might be associated with a blockage in your main sewer main.
The sooner you resolve the main issue, the less likely your home will be in danger of further hurt.
Remember to go with the simplest solution first and be relax.
Practice a just plunger or auger to see for local clogs primarily. If you keep from having to call a licensed plumber, you’ll anticipate saving some amount on costly repairs.
You can aggressively work to break clogs by keeping all lint and waste in your waste bag or container. You ought to even be bound to clean your washing machine’s filter or lint which will be trapped regularly.
Washing your drain pipe regularly also will help to stop the possible overflows.
